Bricks in Space

Diamant Series

Diamant Series

LEGO Designer:


Designed: March 2020

Please share in your network

Diamant is a French orbital launch vehicle. In December 1961 France decided to demonstrate an indigenous satellite-launch capability, using stages in development for its ballistic missile program. Following careful evolutionary development, Diamant was successful on its first attempt in 1965. Improved versions were flown over the next ten years. Although France abandoned the planned ICBM for the solid-propellant SSBS, Diamant technology was used in the European Europa and Ariane launch vehicles.

Diamant A

Diamant development could be done relatively quickly using stages and systems being developed for strategic missiles. In May 1962 CNES selected DMA as program manager, with SEREB as the prime contractor. The Diamant orbital launch vehicle was created by replacing the payload of the existing Saphir test vehicle with a new third stage. Prior to any all-up satellite launch attempt the P064 third stage was flight tested on the smaller suborbital Rubis test vehicle. This evolutionary approach paid off.

Diamant B

As a follow-on to the Diamant-A, CNES decided to evolve a more capable launch vehicle. The Diamant-B used a new first stage with 50% more propellants and 33% more thrust; the same second stage; and a fatter third stage. Six Diamant-B boosters were ordered. Originally four of these were to be used to test the Europa 2 launch vehicle’s Perigee-Apogee System. These tests were cancelled and instead CNES used five of the six boosters for orbital attempts.

Diamant BP4

In January 1972 a further evolution, the Diamant BP.4, was authorized. The second stage was replaced with the P4 Rita motor developed for the MSBS SLBM. The larger 1.38 m diameter fairing developed for the British Black Arrow launcher allowed larger payloads to be accommodated. Three launches of the BP.4 in 1975 completed the Diamant saga.

~ astronautix


Designer Notes

Part count: 67 bricks, 13 lots.

Unit width length height
Studs 6.0 18.0 27.8
Centimetres 4.8 14.4 22.2
Inches 1.9 5.7 8.8

Further Information and References

Designer Notes

Part count:  bricks, lots.

Unit width length height
Studs
Inches
Centimetres

Related Posts

None found